Description
| GB | NS 6500 |
| ISC | H 05500 |
| ASTM | Monel K500 |
| UNS | N 05500 |
| ISO | Monel K500 |
| W-Nr. | 2.4375 |
Monel K500 physical properties:
— Melting point (°C): 1315~1350;0~100°C thermal conductivity (W/m.K):15;0°C~100°C thermal expansion coefficient (10-6 K-1):14.04;0~100°C specific heat capacity (J/ kg.k):544.3;Resistivity (ω.mm 2/m):58.1;Modulus of elasticity (GPa): 179.4
Characteristics: high strength, high hardness, good wear resistance.Good processability
Application: The aged hardened alloy is used in the manufacture of fasteners, pumps and propeller shafts, and valve stems
Chemical element content(%)
| Monel K500 | Average |
| Fe | 1 |
| C | 0.15 |
| Si | 0.25 |
| Mn | 0.75 |
| S | 0.005 |
| Ni | 66 |
| Cu | 29 |
| Ti | 0.6 |
| Al | 2.75 |
Mechanical property
| condition | Bar, forging, wire, sheet, strip, pipe |
| Heat treatment | Solid solution treatment |
| Tensile strength σb Mpa | 620~1380 |
| Yield point σs Mpa | 276~1207 |
| Elongation δ % | 2~45 |
| Reduction of section ψ % | 25~70 |
| Hardness HBW | 110~250 |
Fastener type
| BOLT | Hex bolt | DIN931(ISO 4014)
DIN933(ISO 4017) DIN961(ISO 8676) ANSI B18.2.1 JIS B1180 |
| Hex flange bolt | DIN6921
ANSI B18.2.1 |
|
| Carriage bolt | DIN603(ISO 8677)
ANSI B18.5 |
|
| Eye bolt | DIN580
DIN444 |
|
| Square head bolt | ASME B18.2.1
JIS B1182 |
|
| T bolt | DIN186
JIS B1166 |
|
| U bolt | DIN3570
IFI136 ASME B18.31.5 |
|
| Anchor bolt | ASME B18.31.5
JB/ZQ 4363 JB/ZQ4364 |
|
| SCREW | Hex socket screw | DIN912(ISO 4762)
DIN7984 DIN7991(ISO 10642) ISO 7380 ASME B18.3 |
| Machine screw | DIN963(ISO 2009)
DIN964(ISO 2010) DIN965(ISO7046) DIN966(ISO7047) ANSI B18.6.3P ANSI B18.6.3F DIN84(ISO 1207) DIN85(ISO 1580) |
|
| Set screw | DIN913(ISO 4026)
DIN914(ISO 4027) DIN915(ISO 4028) DIN916(ISO 4029 ) ANSI B18.3 |
|
| Tapping screw | ISO7049
ISO 7050 JIS B1122T DIN7982 DIN968 |
|
| Wooden screw | DIN571
ANSI B18.2.1 |
|
| NUT | Hex nut | DIN 934(ISO 4032)
ANSI B18.2.2 ANSI B18.2.4 DIN 936(ISO 4035) DIN 439(ISO 4036) ISO 8674(UNI 5587) |
| Hex flange nut | DIN6923(ISO 4161
ANSI B18.2.4.4M) IFI 145 |
|
| Lock nut | DIN985
DIN982 DIN980 DIN6926 ANSI B18.16.6 |
|
| Cover nut | DIN1587
DIN917 |
|
| Square nut | DIN557
DIN562 ANSI N18.2.2 |
|
| STUD | Stud | DIN975
DIN976 IFI136 |
| WASHER | Flat washer | DIN125(ISO 7089/ISO 7090)
DIN126(ISO 7091) DIN9021(ISO 7093) ANSI B18.22.1 |
| Spring washer | DIN127
DIN7980 |
Reviews
There are no reviews yet.