Inconel 600 fasteners bolt screw nut washer

Description

GB	NS 3102
ISC	H 06600
JIS	NCF 600
KS	NCF 600
ASTM	Inconel 600
UNS	N 06600
ISO	Inconel 600
EN	NA 14
W-Nr.	2.4816

Inconel 600 has good corrosion resistance of reducing, oxidizing and nitriding media.ⓑ has good stress corrosion cracking resistance at room temperature and high temperature;ⓒ has good corrosion resistance of dry chlorine and hydrogen chloride gas;ⓓ has good mechanical properties at sub-zero, room temperature and high temperature;ⓔ has good creep fracture strength and is recommended for use above 700°.

Corrosion resistance:

Good corrosion resistance to all kinds of corrosive media, high temperature oxidation and scaling resistance, high temperature intergranular corrosion.A restricted chemical modification of the alloy is used for the spark plug electrode (see original).The chromium composition gives the alloy better corrosion resistance under oxidation conditions than nickel 99.2 (alloy 200) and nickel 99.2 (alloy 200, low carbon).At the same time, the higher nickel content makes the alloy have good corrosion resistance in reduction conditions and alkaline solutions, and can effectively prevent chlorine-iron stress corrosion cracking.Alloy 600 has good corrosion resistance in acetic acid, acetic acid, formic acid, stearic acid and other organic acids, and moderate corrosion resistance in inorganic acids.The high purity water used for primary and secondary circulation in nuclear reactors has excellent corrosion resistance.In particular, it is resistant to corrosion by dry chlorine and hydrogen chloride at up to 650°C.At high temperature, the annealed and solution treated alloys have good oxidation resistance and high strength in air.The alloy can also resist ammonia and nitriding and carburizing atmosphere, but the alloy will be corroded by some oxidizing medium during the alternation of REDOX.

Application: heat treatment, nitriding and carburizing equipment.High temperature zone, filter, pickling basket, still, radiation tube, exhaust pipe for control rear buffer.

 

Chemical element content(%)

Inconel 600	Nominal value
Fe	9
C	0.15
Si	0.5
Mn	1
Cr	15.5
Ni	76
Cu	0.5

Mechanical property

Condition	Round bar
Heat treatment	Solid solution treatment
Tensile strength σb Mpa	552~1276
Yield point σs Mpa	172~1207
Elongation δ %	2~50
Reduction of section ψ %	40~70
Hardness HBW	120~190

Fastener type

BOLT	Hex bolt	DIN931(ISO 4014) DIN933(ISO 4017) DIN961(ISO 8676) ANSI B18.2.1 JIS B1180
	Hex flange bolt	DIN6921 ANSI B18.2.1
	Carriage bolt	DIN603(ISO 8677) ANSI B18.5
	Eye bolt	DIN580 DIN444
	Square head bolt	ASME B18.2.1 JIS B1182
	T bolt	DIN186 JIS B1166
	U bolt	DIN3570 IFI136 ASME B18.31.5
	Anchor bolt	ASME B18.31.5 JB/ZQ 4363 JB/ZQ4364
SCREW	Hex socket screw	DIN912(ISO 4762) DIN7984 DIN7991(ISO 10642) ISO 7380 ASME B18.3
	Machine screw	DIN963(ISO 2009) DIN964(ISO 2010) DIN965(ISO7046) DIN966(ISO7047) ANSI B18.6.3P ANSI B18.6.3F DIN84(ISO 1207) DIN85(ISO 1580)
	Set screw	DIN913(ISO 4026) DIN914(ISO 4027) DIN915(ISO 4028) DIN916(ISO 4029 ) ANSI B18.3
	Tapping screw	ISO7049 ISO 7050 JIS B1122T DIN7982 DIN968
	Wooden screw	DIN571 ANSI B18.2.1
NUT	Hex nut	DIN 934(ISO 4032) ANSI B18.2.2 ANSI B18.2.4 DIN 936(ISO 4035) DIN 439(ISO 4036) ISO 8674(UNI 5587)
	Hex flange nut	DIN6923(ISO 4161 ANSI B18.2.4.4M) IFI 145
	Lock nut	DIN985 DIN982 DIN980 DIN6926 ANSI B18.16.6
	Cover nut	DIN1587 DIN917
	Square nut	DIN557 DIN562 ANSI N18.2.2
STUD	Stud	DIN975 DIN976 IFI136
WASHER	Flat washer	DIN125(ISO7089/ISO7090) DIN126(ISO 7091) DIN9021(ISO 7093) ANSI B18.22.1
	Spring washer	DIN127 DIN7980